Pulsefire® LRT/UBF Sling Instructions
lrt

Insert the cord loop end of the sling through the hole in the front of the LRT.

Feed the other end of the sling through the loop and pull snug. Just like installing a camera strap.

Remove the buckle loop and spread the forks to get it around the rear handle tube.

Plug it into the rest of the sling.

Ready to rock.
UBF



Place the loop around the top plate and feed the other end of the sling through it, like installing a camera strap.

Remove the plastic buckle ring from the sling.

Spread the forks and place it around the rear handle.

Connect the buckle ring to the rest of the sling.